This audit is for both the Altra Carson TV Stand for TVs up to 70″ and the Audio Stand. I obtained one TV stand and two sound stands (both in dark/cherry) and they look awesome as a set. The aggregate set is around 98″ wide so you will require a long purge divider in the event that you mean to set up the full set. The things can’t be bought as a set with the 70″ TV stand estimate. I got the sound stands first so I amassed them before getting the TV stand. It around two hours to assemble the two stands. The most difficult part to collect was the entryways as you need to utilize a figure and check technique to get the entryways adjusted effectively so they don’t scratch against the best and base when they open and close. The highest point of the stand is around 55″ tall, and you basically get four retires on each remain notwithstanding the capacity behind the entryway. The guidelines encourage not to put anything on the highest point of the stand, yet in the event that you have something under five pounds that is not brittle, I think it would be protected. The capacity region behind the entryway is exceptionally roomy, and I could fit around 55 blue-beam plates and very nearly 100 CDs (I put the CDs in the back and the blue-beam circles in front, so in the photo, you can’t really observe the CDs).

 

 

The TV stand was additional tedious to assemble than one sound stand which bodes well since it has numerous more parts. The container weighs around 98 pounds, so it is firmly prescribed to have somebody enable you to move the crate particularly in the event that it will be between floors. When gathering the TV stand, you will require a decent arrangement of floor space to lay the greater part of the pieces and equipment. The headings were extremely direct, and as with the sound stands the entryway pivots were the most difficult. The directions don’t list a bore as a required device, yet I don’t think I could have amassed the entryways without one. Without a bore, you would presumably require a moment individual to hold the entryway set up while screwing. The capacity behind the entryways on the TV stand doesn’t have so much room as the sound stand and are more fitting for remotes, controllers, and manuals than media. Each level of the TV stand has a wide opening for lines in the back, however no genuine line administration framework. I utilized link binds and mounts to better compose my ropes. I have a 65″ TV, and it is around 1.25″ far from the edges on each side, so a 70″ TV would be the biggest size one could have without having the TV stretch out past the edges of the stand.

 

At the point when assembled, the TV stand and two sound stands seem as though one finish unit as the tallness of the TV stand is the same as the base level of the sound stand. The main change I would have enjoyed is if the whole best of the TV stand was dark like the 50″ TV remain as the racks of the sound stand are for the most part dark (on the 70″ demonstrate the middle segment of the best is dark however the sides are cherry). Generally, this is an incredible looking and exceptionally tough unit.

You can find it on Amazon here: http://amzn.to/2hZWjwF

Disclaimer: These are my personal opinions, so view them with your own perspective.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites